How-To Pair the QDS Wireless Remote to the Receiver

Posted by Creigh Rourke on

Pairing in 8 Easy Steps

The Quantum Drive System allows you to wind and unwind hose faster than ever before. The standalone, 3-speed QDS technology is compatible with Bazooka Farmstar's 1408, 1810, 2012, 2416, 1810 Crossfire, and 2416 Crossfire hose reel models. With the QDS wireless remote, winding, unwinding, pivoting, and level wind functions can all be accomplished from outside of the tractor cab. (Available functions listed above are dependent on both hose reel and remote models.)

Eager to get started with your QDS hose reel? Here's eight easy steps to pairing your wireless remote with your receiver:

 

 

STEP 1:

Supply power to the Eaton R260 Receiver. The green STATUS light and the red E-STOP light should turn ON.

STEP 2:

Press and HOLD the red button in the bottom right corner of the Eaton TD1140 Transmitter. While holding down the red button, press and HOLD the green button in the bottom left corner until "EATON" comes on the screen. Once the image comes up, RELEASE the buttons.

STEP 3:

ALIGN the top magnet, found on the backside of the transmitter, with the read switch on the receiver. The switch can be located just to the LEFT of the "E" in "EATON" on the receiver.

STEP 4:

Once aligned, the receiver E-STOP light will turn green and start slowly blinking before speeding up. After the light starts blinking quickly, MOVE the transmitter away from the receiver.

STEP 5:

You will then be prompted to PRESS the green button on the transmitter to start pairing. When it is done pairing, the screen should read "Pairing Success."

STEP 6:

Power off the transmitter by pressing the red button TWICE.

STEP 7:

Turn the transmitter on by pressing and HOLDING the green button.

STEP 8:

The transmitter is now paired and READY to be used.

Grab your digital download here!
QDS PAIRING INSTRUCTIONS

So, what are you waiting for? #GetPumping

Categories

RECENT BLOG POSTS